Knowledge Base

Back to home

Knowledge Base

FAQs

FAQs

Frequently Asked Questions about our Services and Solutions

GRL-WP-TPR-C3 FAQs

FAQ on Summary of GRL-WP-TPR-C3 Test Run

FAQ on Retrieving Test Report After Terminating Test Run

FAQ on GRL-WP-TPR-C3 JSON File Path

FAQ on Methods of Accessing the GRL-WP-TPR-C3 Browser Application

FAQ on Downloading Test Report in HTML Format

FAQ on Accessing Other Screens / Tabs During Test Execution

FAQ on Minimum Oscilloscope requirements for certain test measurements

FAQ on Disabling Coil Related Pop-Up Dialogs in GRL-WP-TPR-C3

FAQ on Capturing and Saving GRL-WP-TPR-C3 Trace Plots

FAQ on Automatic Saving of Manual FOD Test Report File

FAQ on Editing Test Configuration Panel While Running Tests

FAQ on GRL-WP-TPR-C3 "Supported 2.5W" Checkbox in BSUT Self-Declaration Form

FAQ on GRL-WP-TPR-C3 Trace Filter Option

FAQ on Coil Placement During Test Run

FAQ on Coil Quality Factor

FAQ on Optimum Coil Position Check

FAQ on Oscilloscope Measurement

FAQ on Acrylic Weight

FAQ on EPP Coils

FAQ on Pre-Test BSUT Warm-Up

FAQ on ThermoMux Connection

FAQ on Magnetic Film

FAQ on Wire Test Condition

FAQ on FOD Test Temperature Limit

FAQ on Frequency Measurement

FAQ on Power Transfer Frequency

FAQ on 5.3.1 Test Pass/Fail

FAQ on Limited Power Test

FAQ on BSUT Test Run

FAQ on USB Charging

FAQ on Ethernet Communication Issue

FAQ on FOD Testing

FAQ on BPP and EPP Common Test Items

FAQ on Rectified Current

FAQ on Thermal Power Test

FAQ on Coil Positioning

FAQ on GRL-WP-TPR-C3 Licensing

FAQ on GRL-WP-TPR-C3 Role As Power Rx or Tx

FAQ on GRL-WP-TPR-C3 Pictures

FAQ on GRL-WP-TPR-C3 Setup

FAQ on 1.5mm Spacer with TPR_MP3 Coil

FAQ on Ethernet & USB Connection from Scope to PC

FAQ on Running Test Cases in GRL-WP-TPR-C3 Qi-Exerciser Mode

FAQ on Temperature Graph in GRL-WP-TPR-C3 Qi-Exerciser

FAQ on WPC Certification and Authorized Test Lab (ATL) Test Requirement for Qi Wireless Products

FAQ on GRL-WP-TPR-C3 Certification

See more

GRL-USB-PD-C2 FAQs

FAQ on VIF Parameters for Running DP-ALT Mode MOI?

FAQ on Retrieving Test Reports if Test Run is Terminated

FAQ on Executing BC 1.2 MOI with VIF File

FAQ on Accessing Mid-Level Eye Diagrams

FAQ on Time Difference in Trace Plot

FAQ on Running DUT Tests Using USB Type-C STD Cable

FAQ on Express Mode (Beta)

FAQ on Channels Button in Results Screen

FAQ on Report Data Management

FAQ on E-marking for GRL-SPL Cables

FAQ on Download Current HTML Report Vs Download Current DUT Report Data

FAQ on Running Aborted / Non-Executed Test Cases Only

FAQ on Quick Search on Test Cases

FAQ on Repeating Test Runs

FAQ on Expand Test List

FAQ on Running USB Type-C Functional Tests Without Data Validation

FAQ on Connecting Thunderbolt Short Fixture for Thunderbolt 2.4 and 2.6 Tests

FAQ on VIF Requirement for QC Testing

FAQ on "Click to View Protocol Trace"

FAQ on Changing DUT Information in GRL-USB-PD-C2 / C2-EPR.

FAQ on Providing Test Information Before Executing Tests on GRL-USB-PD-C2 / C2-EPR

FAQ on Timeout Pop-Up Message on GRL-USB-PD-C2 / C2-EPR

FAQ on Repeated Test Runs Without User Intervention

FAQ on Editing VIF Data on GRL-USB-PD-C2 / C2-EPR Browser Application

FAQ on GRL-USB-PD-C2 vs GRL-USB-PD-C2-EPR

FAQ on Reading DUT Capabilities on GRL-USB-PD-C2 / C2-EPR

FAQ on Scan Network on GRL-USB-PD-C2 / C2-EPR

FAQ on Accessing Calibration Data on GRL-USB-PD-C2 / C2-EPR

FAQ on Purchased License Information of GRL-USB-PD-C2 / C2-EPR

FAQ on Accessing the User Guide of GRL-USB-PD-C2 / C2-EPR Browser Application

FAQ on Accessing Solved Bug Fixes on the GRL-USB-PD-C2 / C2-EPR

FAQ on Thunderbolt Self-Calibration Before Thunderbolt Testing

FAQ on FRS AC Auto Box for Running FRS Sink Tests

FAQ on Why Regression Fixture is Required for GRL-USB-PD-C2 But Not for GRL-USB-PD-C2-EPR

FAQ on GRL-USB-PD-C2 Dynamic IP

FAQ on GRL-USB-PD-C2 Ethernet Communication Issue

FAQ on GRL-USB-PD-C2 Setup Images

FAQ on GRL-USB-PD-C2 EPR Licensing

FAQ on GRL-USB-PD-C2 Test Modes

FAQ on GRL-USB-PD-C2 EPR Tester

FAQ on GRL-USB-PD-C2 VIF File Creation

FAQ on GRL-USB-PD-C2 Licensing

FAQ on GRL-USB-PD-C2 Firmware Update

FAQ on GRL-USB-PD-C2 Test Report

FAQ on GRL-USB-PD-C2 Browser Support

FAQ on GRL-USB-PD-C2 OS Support

FAQ on GRL-USB-PD-C2 Remote Connection

FAQ on GRL-USB-PD-C2 to PC Connection

FAQ on BUSIDLE Test

See more

GRL-PSP FAQs

FAQ on GRL-PSP PDO Testing

FAQ on GRL-PSP PPS Testing

FAQ on Cable IR Drop Calibration in GRL-PSP

FAQ on GRL-PSP Ethernet Communication Error

FAQ on GRL-PSP Battery Cycler Test

FAQ on Adding 3rd Party Equipment in GRL-PSP

FAQ on Saving GRL-PSP Test Report

FAQ on GRL-PSP Trace Resolution Setting

FAQ on GRL-PSP Supported Cables

FAQ on GRL-PSP Trace Plot View

FAQ on GRL-PSP PRO Licensing

FAQ on GRL-PSP Licensing

FAQ on GRL-PSP OS Support

See more

GRL-V-UP FAQs

FAQ on GRL-M1-V-UP Software VS GRL-V-UP API Test Software

GRL-C3-MP-TPR FAQs

FAQ on Loading testbackup.json File from Outside of the C:\GRL\GRL-WP-MPP-C3\Report Path

FAQ on Extended Received Power Packet (PLA) vs MPP Power Loss Accounting (MPLA)

FAQ on GRL-C3-MP-TPR Testbackup.json File

FAQ on Enabled Data Streams Exchange

FAQ on Basic Requirement for Test Power Receiver (TPR) Product Testing

FAQ on GRL-C3-MP-TPR Methods for Testing Foreign Object Detection (FOD)

FAQ on GRL-C3-MP-TPR Load Power Vs Rectified Power

FAQ on GRL-C3-MP-TPR t_Terminate

FAQ on GRL-C3-MP-TPR V_rect Delta Value

FAQ on GRL-C3-MP-TPR Cloak Timings

FAQ on GRL-C3-MP-TPR Offset Measurement

FAQ on GRL-C3-MP-TPR Duty Cycle Measurement

FAQ on GRL-C3-MP-TPR tpla_fast and tpla_slow

FAQ on GRL-C3-MP-TPR Protocol Modes

See more