FAQ on Rectified Current
Q: Is it correct to say that TP4 is Rectified Current? In the customer's environment, there is a BSUT that has unstable current, but it passes after several times of redoing.
Is there any problem with such a method?
A: In this case after applying a 3.5 ohms load, the DUT got detached immediately and again it re-tried and entered into the Power Transfer Phase. Hence the Rectified Current is unstable and the coil temperature is fluctuating in between the tests. This should be considered as Fail but we are making it as Pass which we will update in the upcoming release.
