![2. Logo_White.png]](https://support.graniteriverlabs.com/hs-fs/hubfs/2.%20Logo_White.png?height=40&name=2.%20Logo_White.png){kind=small}
Test Solutions
Find helpful articles to learn more about GRL test and measurement hardware & software products here.
GRL-WP-TPR-C3 Automation Test Browser Application
- Check for Optimum Coil Position with GRL-WP-TPR-C3
- How to Use API Mode in GRL-WP-TPR-C3 Browser App
- Read DUT Capabilities and Qi Certification with GRL-WP-TPR-C3
- How to Use the "Authenticate" Button Feature for Certificate Validation
- GRL-WP-TPR-C3 Tester Configuration
- GRL-WP-TPR-C3 BSUT Self Declaration Form
- How to Send CEP+-60 in GRL-WP-TPR-C3 Qi-Exerciser During 20a/b Testing
- Instructions Before Running GRL-WP-TPR-C3 Authentication Tests
GRL-PSP Application
GRL-USB-PD-C2 / C2-EPR Automation Test Browser Application
- How to Run USB Type-C Functional Tests with GRL-USB-PD-C2 / C2-EPR
- EPR Source & Sink Protocol Flow with GRL-USB-PD-C2-EPR
- How to Perform Thunderbolt Short Tests
- Message ID Retry Case for TEST.PD.SRC3.1 Test Case
- How to Perform SVID Mode Checks
- How to Measure Bit Rate
- How to Get Battery Status Response
- More About GRL-USB-PD-C2 / C2-EPR TEST.PD.PHY.ALL.3 Collision Avoidance
- Manual Firmware Update Using SD Card on GRL-USB-PD-C2
- Bus Idle Test Case Trace Verification with GRL-USB-PD-C2 / C2-EPR
- Perform Cable IR Drop Calibration with GRL-USB-PD-C2 / C2-EPR
- Generate Trace Files with GRL-USB-PD-C2 / C2-EPR
- Get Device Data with GRL-USB-PD-C2 / C2-EPR