![2. Logo_White.png]](https://support.graniteriverlabs.com/hs-fs/hubfs/2.%20Logo_White.png?height=40&name=2.%20Logo_White.png){kind=small}
FAQs
Frequently Asked Questions about our Services and Solutions
GRL-WP-TPR-C3 FAQs
- FAQ on GRL-WP-TPR-C3 Certification
- FAQ on Summary of GRL-WP-TPR-C3 Test Run
- FAQ on Retrieving Test Report After Terminating Test Run
- FAQ on GRL-WP-TPR-C3 JSON File Path
- FAQ on Methods of Accessing the GRL-WP-TPR-C3 Browser Application
- FAQ on Downloading Test Report in HTML Format
- FAQ on Accessing Other Screens / Tabs During Test Execution
- FAQ on Minimum Oscilloscope requirements for certain test measurements
- FAQ on Disabling Coil Related Pop-Up Dialogs in GRL-WP-TPR-C3
- FAQ on Capturing and Saving GRL-WP-TPR-C3 Trace Plots
- FAQ on Automatic Saving of Manual FOD Test Report File
- FAQ on Editing Test Configuration Panel While Running Tests
- FAQ on GRL-WP-TPR-C3 "Supported 2.5W" Checkbox in BSUT Self-Declaration Form
- FAQ on GRL-WP-TPR-C3 Trace Filter Option
- FAQ on Coil Placement During Test Run
- FAQ on Coil Quality Factor
- FAQ on Optimum Coil Position Check
- FAQ on Oscilloscope Measurement
- FAQ on Acrylic Weight
- FAQ on EPP Coils
- FAQ on Pre-Test BSUT Warm-Up
- FAQ on ThermoMux Connection
- FAQ on Magnetic Film
- FAQ on Wire Test Condition
- FAQ on FOD Test Temperature Limit
- FAQ on Frequency Measurement
- FAQ on Power Transfer Frequency
- FAQ on 5.3.1 Test Pass/Fail
- FAQ on Limited Power Test
- FAQ on BSUT Test Run
- FAQ on USB Charging
- FAQ on Ethernet Communication Issue
- FAQ on FOD Testing
- FAQ on BPP and EPP Common Test Items
- FAQ on Rectified Current
- FAQ on Thermal Power Test
- FAQ on Coil Positioning
- FAQ on GRL-WP-TPR-C3 Licensing
- FAQ on GRL-WP-TPR-C3 Role As Power Rx or Tx
- FAQ on GRL-WP-TPR-C3 Pictures
- FAQ on GRL-WP-TPR-C3 Setup
- FAQ on 1.5mm Spacer with TPR_MP3 Coil
- FAQ on Ethernet & USB Connection from Scope to PC
- FAQ on Running Test Cases in GRL-WP-TPR-C3 Qi-Exerciser Mode
- FAQ on Temperature Graph in GRL-WP-TPR-C3 Qi-Exerciser
- FAQ on WPC Certification and Authorized Test Lab (ATL) Test Requirement for Qi Wireless Products
GRL-USB-PD-C2 FAQs
- FAQ on VIF Parameters for Running DP-ALT Mode MOI?
- FAQ on Retrieving Test Reports if Test Run is Terminated
- FAQ on Executing BC 1.2 MOI with VIF File
- FAQ on Accessing Mid-Level Eye Diagrams
- FAQ on Time Difference in Trace Plot
- FAQ on Running DUT Tests Using USB Type-C STD Cable
- FAQ on Express Mode (Beta)
- FAQ on Channels Button in Results Screen
- FAQ on Report Data Management
- FAQ on E-marking for GRL-SPL Cables
- FAQ on Download Current HTML Report Vs Download Current DUT Report Data
- FAQ on Running Aborted / Non-Executed Test Cases Only
- FAQ on Quick Search on Test Cases
- FAQ on Repeating Test Runs
- FAQ on Expand Test List
- FAQ on Running USB Type-C Functional Tests Without Data Validation
- FAQ on Connecting Thunderbolt Short Fixture for Thunderbolt 2.4 and 2.6 Tests
- FAQ on VIF Requirement for QC Testing
- FAQ on "Click to View Protocol Trace"
- FAQ on Changing DUT Information in GRL-USB-PD-C2 / C2-EPR.
- FAQ on Providing Test Information Before Executing Tests on GRL-USB-PD-C2 / C2-EPR
- FAQ on Timeout Pop-Up Message on GRL-USB-PD-C2 / C2-EPR
- FAQ on Repeated Test Runs Without User Intervention
- FAQ on Editing VIF Data on GRL-USB-PD-C2 / C2-EPR Browser Application
- FAQ on GRL-USB-PD-C2 vs GRL-USB-PD-C2-EPR
- FAQ on Reading DUT Capabilities on GRL-USB-PD-C2 / C2-EPR
- FAQ on Scan Network on GRL-USB-PD-C2 / C2-EPR
- FAQ on Accessing Calibration Data on GRL-USB-PD-C2 / C2-EPR
- FAQ on Purchased License Information of GRL-USB-PD-C2 / C2-EPR
- FAQ on Accessing the User Guide of GRL-USB-PD-C2 / C2-EPR Browser Application
- FAQ on Accessing Solved Bug Fixes on the GRL-USB-PD-C2 / C2-EPR
- FAQ on Thunderbolt Self-Calibration Before Thunderbolt Testing
- FAQ on FRS AC Auto Box for Running FRS Sink Tests
- FAQ on Why Regression Fixture is Required for GRL-USB-PD-C2 But Not for GRL-USB-PD-C2-EPR
- FAQ on GRL-USB-PD-C2 Dynamic IP
- FAQ on GRL-USB-PD-C2 Ethernet Communication Issue
- FAQ on GRL-USB-PD-C2 Setup Images
- FAQ on GRL-USB-PD-C2 EPR Licensing
- FAQ on GRL-USB-PD-C2 Test Modes
- FAQ on GRL-USB-PD-C2 EPR Tester
- FAQ on GRL-USB-PD-C2 VIF File Creation
- FAQ on GRL-USB-PD-C2 Licensing
- FAQ on GRL-USB-PD-C2 Firmware Update
- FAQ on GRL-USB-PD-C2 Test Report
- FAQ on GRL-USB-PD-C2 Browser Support
- FAQ on GRL-USB-PD-C2 OS Support
- FAQ on GRL-USB-PD-C2 Remote Connection
- FAQ on GRL-USB-PD-C2 to PC Connection
- FAQ on BUSIDLE Test
GRL-PSP FAQs
- FAQ on GRL-PSP PDO Testing
- FAQ on GRL-PSP PPS Testing
- FAQ on Cable IR Drop Calibration in GRL-PSP
- FAQ on GRL-PSP Ethernet Communication Error
- FAQ on GRL-PSP Battery Cycler Test
- FAQ on Adding 3rd Party Equipment in GRL-PSP
- FAQ on Saving GRL-PSP Test Report
- FAQ on GRL-PSP Trace Resolution Setting
- FAQ on GRL-PSP Supported Cables
- FAQ on GRL-PSP Trace Plot View
- FAQ on GRL-PSP PRO Licensing
- FAQ on GRL-PSP Licensing
- FAQ on GRL-PSP OS Support
GRL-V-UP FAQs
GRL-C3-MP-TPR FAQs
- FAQ on GRL-C3-MP-TPR Protocol Modes
- FAQ on Capturing I_Coil Waveform Using GRL-C3-MP-TPR Tester
- FAQ on Loading testbackup.json File from Outside of the C:\GRL\GRL-WP-MPP-C3\Report Path
- FAQ on Extended Received Power Packet (PLA) vs MPP Power Loss Accounting (MPLA)
- FAQ on GRL-C3-MP-TPR Testbackup.json File
- FAQ on Enabled Data Streams Exchange
- FAQ on Basic Requirement for Test Power Receiver (TPR) Product Testing
- FAQ on GRL-C3-MP-TPR Methods for Testing Foreign Object Detection (FOD)
- FAQ on GRL-C3-MP-TPR Load Power Vs Rectified Power
- FAQ on GRL-C3-MP-TPR t_Terminate
- FAQ on GRL-C3-MP-TPR V_rect Delta Value
- FAQ on GRL-C3-MP-TPR Cloak Timings
- FAQ on GRL-C3-MP-TPR Offset Measurement
- FAQ on GRL-C3-MP-TPR Duty Cycle Measurement
- FAQ on GRL-C3-MP-TPR tpla_fast and tpla_slow