GRL-WP-TPR-C3 Automation Test Browser Application
      Back to home
      1. Knowledge Base
      2. Test Solutions
      3. GRL-WP-TPR-C3 Automation Test Browser Application

      Instructions Before Running GRL-WP-TPR-C3 Authentication Tests

      Procedure



      1. Go to the Test Configuration screen.
      2. Connect the 1F coil and click on the Read Capabilities button.
      3. Verify the Authentication request (AI bit in UI) in the Read Capabilities section (the AI bit should be enabled if it supports authentication) and then proceed with test execution.

      Note: Authentication test cases will be executed ONLY if the AI bit is enabled in the Read Capabilities section.